Acoustic Solid
ASR Audio Systeme
Dealer Login

Main Amplifiers
Emitter II Exclusive
The Emitter II Exclusive (Dual Mono) sets another milestone in the consistent further development of the Emitter II. All possible improvements of the Emitter II are integrated into this version. The sound picture is very fast and dynamic, and the audio solution is increased. Furthermore, the sound is quiescent and even more relaxing, smooth and homogeneous. Through its extremely high speed, the Emitter II Exclusive reproduces authentically the three dimensions of good recordings into the listening room. The sound is faultless to such a degree that the audible location of the loudspeakers at the listening position is nearly impossible.
Click here to view large image
Click here to view large image
Click here to view large image
Click here to view large image
Downloads :
Specifications :
Output Power (8/4/2 ohms) : 2 x 280 | 2 x 490 | 2 x 900
Frequency range : 1-100,000 Hz with +/-1dB, 20-20,000 Hz +/- 0.2 dB
S / N Ratio at line input : > 86 dB
Rise time : < 8 µS
Distortion : Maximum 0.01%
Damping factor : > 1,000
Inputs / Outputs : 5 x high level inputs (RCA)
1 x balanced input with selectable impedance (XLR)
1 x direct input (RCA)
1 x tape outputs (RCA)
1 x Sub-out/Pre-out (RCA)
Transformers : 4 x 700 VA
Power consumption : In Standby, 20 VA | Energy mode, 90 VA | Full power, 200 VA
Power Supply : (2) separate power supplys with (2) Magic cord (1.5M) included
Dimensions (W x D x H) : 22.5" x 18.5" x 9" (Main unit)
18" x 13" x 6" (Power supply)
18" x 13" x 6" (Optional battery power supply “akku”)
Weight : 104 lbs (Main unit)
71 lbs (Power supply)
57 lbs (Optional battery power supply unit "akku")
Options :
Battery power supply : Emitter II Exclusive can accept a separate battery PSU (akku)
Version Blue : Blue LED's & blue display, engraving 'Version Blue', solid brass feet in Chrome. Silver or Black heatsinks
Elektroylyt-capacitors : Higher voltage from 80V to 100V for EMT II Exclusive with “akku”
WBT connectors (package) : Silver or copper connectors and speaker binding posts
XLR connectors in Silver : XLR connectors with massive pure silver contact
Extra inputs : 2nd pair of balanced input with selectable impedance (XLR)
7th &/or 8th high level input (RCA)
Dedicated Home Theater bypass input (RCA)
Extra outputs : Headphone output in front or rear panel
2nd and/or 3rd pair of speaker output connectors
Rhodium fuses : High grade Rhodium fuses for power supply's & battery PSU
Umbilical cords : Available in 1/M increments to allow for PSU placement in the basement or a separate room

     © 2006 Musical Sounds, LLC   Legal Statement | Privacy Policy